Re: How to mark unassembled parts in xDX Designer and during BOM Output in...
There are lots of discussions on the Communities covering various aspects of this, try searching on 'Exclude from Part List' Also look here: Re: Mark unused parts in...
View ArticleRe: Allegro to DxDesigner back annotation
If you are using the netlist flow and the PCB Interface then this is bi-directional. If you are using File - Export - Cadence Allegro then it is one way only. The PCB Interface to Cadence is a licensed...
View ArticleCan't change or use new via type
For the board I'm currently working on, I created a new via type called "ROUTING" with the following properties: I created the via by following the standard procedure outlined in the help file and I...
View ArticleRe: Bundle Length dimension(text) appears on longer bundles
Hi Pat,Appreciate your quick response. I already tried this option. In this case the text will be oriented 0 deg always. I like the idea. But my requirement is text should be oriented 0 when bundle is...
View ArticleRe: Can't change or use new via type
Go to Setup | Design rules | Default | Routing and move your new available via to the selected vias side.
View ArticleRe: Can't change or use new via type
That option doesn't exist for me (see below): For reference, I'm on the PADS ES suite running Layout (and Router, and xDX Designer) VX.1.2 EDIT: I tried adding the "Design Rules" button to my toolbar...
View ArticlePrinting issues?
Is there a way to center the print when i plot it to my plotter? Can i make a print preview?
View ArticleRe: DxDesinger 7.9.2: Adding a new "customer" toolbar using automation
I would be interrested in Markus's question as well: Is it possible to create the new toolbar at a specific location? Up to now, if I create a new toolba it's always at the lower left. How can I move...
View ArticleRequirement in Wire Table to display Terminal & seal Part no.
We have a requirement for our wire table to display the terminal part no & seal part no within columns. I have created a custom Query for terminal but not working, here is what I have written
View ArticleRe: Center Dot Drill Hole Open in Bottom Layer
Hello Dinesh,Yes, you may defining "annular" pad on bottom layer for all the pads used in your job.The problem is that you wil have to do this for all parts presents in the PCB.the result will appears...
View ArticleRe: Bundle Length dimension(text) appears on longer bundles
Hi VijayanI will let someone else answer the Query question - it may be possible but that I've not done much in that area. "Exclude from apply style" you can over-ride this by selecting an object then...
View ArticleRe: How to get Back Propagate results in Sim Stress Analysis
To propagate column data back such as the wire sizing information: Click the Propagate Back button . A dialog is displayed from which you can select the column of data to use: Select the...
View ArticleRe: How to get Back Propagate results in Sim Stress Analysis
Hi Prashant You beat me by 5 minutes. One thing I would add. I found the answer the following document and would encourage the customer to check it for more information....
View ArticleRe: Requirement in Wire Table to display Terminal & seal Part no.
Hi Neelu, Please create a query like shown below:This will display the terminals on both the ends of wire.
View ArticleRe: Center Dot Drill Hole Open in Bottom Layer
I also use the solution Vincent wrote.OrCad has been able do this for many years, but for some reason Mentor does not think it is worth adding this functionality.If you like you can vote up the idea -...
View ArticleRe: More 7.9.x to VX translations
we had a similar issue / error here with MGCPCBReleaseEnvServer A colleague found out that- running vbs-scripts on a 64 bit system with cscript -> windows uses the 32 bit version of cscript, as 1st...
View ArticleRe: Requirement in Wire Table to display Terminal & seal Part no.
Hello Sir, Thankyou , I tried this same query its working but its not giving me terminal & seal in two different columns for side A & Side B connector, both end connector are coming in one...
View ArticleRe: Center Dot Drill Hole Open in Bottom Layer
Thanks for your reply @Mr.Vincent, Your right we can use annular pad,but annular only in circle can't do square,rectangular and oblong pads,because of required to mention first in...
View Articlewhat is the different between PADS 9.4 vs PADS 9.5 ??
Hi everyone,I have some clarification about version between PADS 9.4 vs PADS 9.5. ???please suggest anyone..!
View Article