Re: Fixed and locked patterns
I turned the display patterns to outline and issue went away. If you set your display patterns to solid, you should be able to reproduce.
View ArticleRe: 3D-Experience with 3D-mouse?
Hello, I did really like separating the 3D view control (space mouse) from the selection (normal mouse). It seems like it would become very productive if I could get more hours of seat time. However...
View ArticleClik here to view.
Re: 'Create pdf' in Pads Logic
Hi, I found a temporary solution for this issue which can be tried. In my case this problem seems to be linked to the screen resolution of some PC monitor configurations. Changing the screen resolution...
View ArticleRe: 'Create pdf' in Pads Logic
Thanks to you both for your posts in our community. I am going to move it to the more appropriate product-specific PADS community where it will receive greater visibility.
View ArticleLVS mismatch on calibre: sub! ; drain and source sharing issue?
Hello there,I have made DFF layout in ON semi 0.5um (previous AMI 0.5um) process. The DRC is clean. Now, I am having an issue with LVS in Calibre. (For LVS, I have created netlist from Cadence and...
View ArticleClik here to view.
Re: 'Create pdf' in Pads Logic
Hi, Just wondering why my name displays as 3a49bbb5-a7fd-9719-0100-014dfe081f51 in this discussion and not Martin Beetge. This is when I’m not logged in. Best regards, Martin Beetge Product...
View ArticleRe: UGS NX5 Integration videos
Thank you Vincent, How do we import the .plmxml to Vesys since Vesys has only Vesys 3D Harness and DSI, and Capital Bridge has 3D Wiring ? Thanks,Jagadhees.
View ArticleRe: UGS NX5 Integration videos
The NX Harness import is a licensed adaptor. In addition, it also needs to be enabled in <vesys_install>\adaptors\bridgeconfig.xml, section 4. Uncomment the NX element, save and restart VHarness.
View Articlepwrshell failed
I'm having issues with PADSVX.0 licensing. I have the license file of my company (Node-locked, mobile compute), the USB dongle and I've installed both the license and application software. When...
View ArticleLength Unit Conflict between Vesys 2.0 with NX, while importing NX (.plmxml)...
Hi, I have importing NX-Harness Integration (*.plmxml) file into Vesys Harness for 2D flattening. The Length used on Vesys schematic is in Inches unit only & the length used in NX also inches...
View ArticleMulti Port rippers
Currently using EE7.9.3has anymore made multi-port rippers? (like old BS days) 1x4, 1x8, 1x16doesn't seem more than 1 ripper can be setup/used
View ArticleRe: Alternate symbols in DxDesigner
I found where symbols are pulled from. You use <Setup><Settings...>(Symbol Libraries) and define a path to a folder ABOVE the folder with the symbols for a Table in the database...
View ArticleClik here to view.
Can we use PartQuest Symbols in pads Logic?
Hi Gray, I am using both xdx designer and Pads logic (vx1.2) & I use part quest (Digikey) for downloading components in xdx, So, is there any option to download part quest digikey...
View ArticleTrace length
Hello,I use EE7.9.4 update 39.In Route Mode when I clicking on a trace with vias, in status line the trace length is displayed.But in the displayed trace length, the lenght of the vias aren't...
View ArticleClik here to view.
Re: Automated Screenshot of xPCB Layout Layers
Patrick,thanks. The link you provided was good input. They did it a little bit different that the way I dit it.Now I have my Image. I am also not working with the HWND of the Application, because it...
View ArticleGeneral Clearance Rules - copper to outline
Hi colleagues,I am trying to specify design rules with Constraint manager, general clearance rules like copper (poured copper) to board outline but I am unable to find any setting like this. I found...
View ArticleCan the font style that CAM uses for the drill chart be changed?
When using the CAM output routine in PADS Layout to generate a PCB fabrication drawing that includes a drill chart, is it possible to pass the default font style specified in Layout...
View ArticleRe: Can the font style that CAM uses for the drill chart be changed?
I don't think so. That font seems hard coded within Layout. There is a script to generate a drill drawing you can add to the design: Drill Table UtilityThere may be an easy way to change the font...
View ArticleRe: Alternate symbols in DxDesigner
Interesting in some reading too I found similar info that led me to settings, but I think the only way you see "Symbol Libraries" if you are using netlist flow,if you are using Integrated flow that...
View ArticleRe: Automated Screenshot of xPCB Layout Layers
With the current release, the Automation of Display Control is quite functional, and very different than it was in 7.9.x and before. You can do anything you want to with it, as before, it's just...
View Article